forme logo orange

 

PRODUCTS

NP2000 disinfection device



Specifications

Programmable wall nebulizer controlled remotely by simple dry contact. Flow rate 2000 mL / h

 

IN STOCK

Technical sheet

Fan : 168 m3 / h - 24 V DC - IP68
Engine : 
BRUSHLESS
Pump : 
24VDC peristaltic
Hose Pump : 
Pharmed 2X4mm
Disc rotation speed (rpm) : Greater than 40,000 RPM
Power Supply Input : 100 to 240 V, 50-60 Hz, 2A
Power Supply Output : 24Vdc / 5A
Max power consumption : 65Watts
Liquid flow (ml / h) : 2,000
Liquid presence control : Optical sensor
Tank : Without
Drums : Without
Charging time (h) : X
Battery life (min.) : X
Drop size (µm) : <15µm
Width (mm) : 220
Height (mm) : 90
Length (mm) : 220
Weight (kg) : 2
Automatic drain : Yes
Material : INOX 304L
Seals : PTFE
Sound level : 64dBA

Find out more

 

This nebulizer is intended to be fixed on a wall in which an opening will have been made allowing air to be sucked outside the volume that one wants to treat (airlock, clean room, etc.) and to be programmed from a PLC or computer.

 

The disk is supplied with liquid via a peristaltic pump which sucks the liquid from a container via a flexible silicone hose.

 

The nebulizer is equipped with an electronic card:

  • Controlling all the functions of the device: separate starting and stopping of the motor driving the disc, the fan, the pump and the liquid presence sensor.
  • Providing the possibility of knowing at all times the operating state of the motor, the fan, the pump and the liquid presence sensor.

 

Other functions and controls

  • The nebulizer is fitted with a liquid presence sensor (CPL) placed just upstream of the disc which automatically stops the rotation of the disc when no liquid is detected.

 

You will also like